Kitty Hawk-KH45
- Product SKU: NHL-KH45
- Category: Area Site Lighting (Street Lighting), Outdoor
- Die-Cast Adaptor for 4″ to 6″ Round Poles, Bronze Powdercoat Finish. Use with Kitty Hawk Mounting Arm only.
- Die-Cast Wall Mount Adaptor, Bronze Powdercoat Finish. Use with Kitty Hawk Mounting Arm only.
- Single Pole Tenon Spoke Bracket, 2 3/8"Horizontal Mounting Arm, Bronze Powdercoat Finish, Includes Hardware.
- Twin Pole Tenon Spoke Bracket, 2 3/8" Horizontal 90° Mounting Arms, Bronze Powdercoat Finish, Includes Hardware.
- Twin Pole Tenon Spoke Bracket, 2 3/8"Horizontal 180° Mounting Arms, Bronze Powdercoat Finish, Includes Hardware.
- Triple Pole Tenon Spoke Bracket, 2 3/8"Horizontal 90° Mounting Arms, Bronze Powdercoat Finish, Includes Hardware.
- Triple Pole Tenon Spoke Bracket, 2 3/8"Horizontal 120° Mounting Arms, Bronze Powdercoat Finish, Includes Hardware.
- Quad Pole Tenon Spoke Bracket, 2 3/8"Horizontal 90° Mounting Arms, Bronze Powdercoat Finish, Includes Hardware.
- 110-120VAC Instant Twist Lock Photocell
- 110-277VAC Instant Twist Lock Photocell
- 120VAC Time Delay Twist Lock Photocell
- 277VAC Time Delay Twist Lock Photocell
- Twist Lock Non-Shorting (Open) Cap Disconnects Service to Fixture for Temporary or Permanent Disabling (Fixture Always Off). IP65, 480V Maximum.
- Twist Lock Shorting Cap Provides Fixed Service to Fixture (Fixture Always on). IP65, Rated Load 7200w Tungsten.
- Die Cast Accessory Housing for Installing Sensors or Other Lighting Controls, Bronze Powdercoat Finish
- Aluminum House Side Shield, Bronze Powdercoat Finish, Includes Hardware
- Die-Cast Adaptor for 4″ to 6″ Round Poles, Bronze Powdercoat Finish. Use with Kitty Hawk Mounting Arm only.
- Die-Cast Wall Mount Adaptor, Bronze Powdercoat Finish. Use with Kitty Hawk Mounting Arm only.
- Single Pole Tenon Spoke Bracket, 2 3/8"Horizontal Mounting Arm, Bronze Powdercoat Finish, Includes Hardware.
- Twin Pole Tenon Spoke Bracket, 2 3/8" Horizontal 90° Mounting Arms, Bronze Powdercoat Finish, Includes Hardware.
- Twin Pole Tenon Spoke Bracket, 2 3/8"Horizontal 180° Mounting Arms, Bronze Powdercoat Finish, Includes Hardware.
- Triple Pole Tenon Spoke Bracket, 2 3/8"Horizontal 90° Mounting Arms, Bronze Powdercoat Finish, Includes Hardware.
- Triple Pole Tenon Spoke Bracket, 2 3/8"Horizontal 120° Mounting Arms, Bronze Powdercoat Finish, Includes Hardware.
- Quad Pole Tenon Spoke Bracket, 2 3/8"Horizontal 90° Mounting Arms, Bronze Powdercoat Finish, Includes Hardware.
- 110-120VAC Instant Twist Lock Photocell
- 110-277VAC Instant Twist Lock Photocell
- 120VAC Time Delay Twist Lock Photocell
- 277VAC Time Delay Twist Lock Photocell
- Twist Lock Non-Shorting (Open) Cap Disconnects Service to Fixture for Temporary or Permanent Disabling (Fixture Always Off). IP65, 480V Maximum.
- Twist Lock Shorting Cap Provides Fixed Service to Fixture (Fixture Always on). IP65, Rated Load 7200w Tungsten.
- Die Cast Accessory Housing for Installing Sensors or Other Lighting Controls, Bronze Powdercoat Finish
- Aluminum House Side Shield, Bronze Powdercoat Finish, Includes Hardware
Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Includes Receptacle and Shorting Cap. NickelPlated Stainless Steel Hardware.
Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request.
Lens: Clear Flat Glass Lens or Clear Flat Prismatic Glass Lens
Mounting Options: Mounts with Kitty Hawk Arm, Adjustable Slipfitter, 2 3/8" Diameter Mounting Arm Adapter, Yoke, or Two-Piece Bracket. (Factory Installed)
LED: Aluminum Boards
Wattage: 167w: Array: 167.3w, System Input: 177w (250-400w HID Equivalent) 256w: Array: 255.7w, System Input: 281w (400-1000w HID Equivalent)
Driver: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz; Dimmable Driver
Listing & Ratings: CSA: Listed for Wet Locations. Operating Temperatures: -40°C to +50°C IP67 sealed LED compartment
Related items
MULTI-PURPOSE LED AREA LIGHT 13,000-39,000 Lumens - The MMFL3 & LMFL3 series is a group of architectural LED area luminaires designed to illuminate parking areas, pathways, building facades, loading docks, and a wide variety of other large, general site lighting applications. Multiple mounting options make the MMFL3 & LMFL3 a versatile luminaire for flood lighting, pole-, ground- and wall-mounted area lighting, and other outdoor lighting requirements.
NHL- FLQ Power Adjustable Area Lights deliver extreme intensity and high lumen output for area light applications. Superior color, long life and high efficiency allows this luminaire to outperform traditional HID luminaires. The rugged housing and dedicated LED design offers advanced thermal management and protection against outdoor and semi-outdoor environments. Lighting quality and intensity provides benefits for safety and security.
With a beautiful slimline design along with one of the highest lumen performance on the market,
this versatile fixture can be used as a flood light or an area light,
including a multitude of mounting options, surge protection devices,
IOT photocell capability, and the most technologically advanced LED's on the market,
the NHL-RMH2 is ready to conquer the lighting landscape.
As part of the FLL series, these commercial & architectural LED flood lights are versatile & efficient. They are fitted with industrial grade photocells.
Download NHL-FLL310 20W-40K PDF Download NHL-FLL310 30W-40K PDF Download NHL-FLL320 40W-40K PDF Download NHL-FLL320 50W-40K PDF Download NHL-FLL330 80W-40K PDF Download NHL-FLL330 100W-40K PDF Download NHL-FLL340 120W-40K PDF Download NHL-FLL340 150W-40K PDF Download NHL-FLL350 300W-40K PDF