RMR16WP-Wet Location EM
![Higher Wattage Inverters Series]()
![MR16X Emergency Unit Wet Location]()
![WLEX Exit Sign]()
![Wet Location Exit/Emergency Combo]()
RMR16WP-Wet Location EM
Available:
In Stock
- Product SKU: NHL-RMR16WP
- Category: Emergency, Life Safety
$0.00
Features/Specifications
ILLUMINATION- Two fully adjustable, ultra-bright, round, 7.2W MR-16 halogen lamp heads with a fully gasketed enclosure and clear polycarbonate lens cover.
- Dual 120/277 voltage.
- Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing.
- LVD (low voltage disconnect) prevents battery from deep discharge.
- 6V maintenance-free, rechargeable Sealed lead acid battery.
- Internal solid-state transfer switch automatically connects the internal battery to lamp heads for minimum 90-minute emergency illumination.
- Fully automatic solid-state, two-rate charger initiates battery charging to recharge a discharged battery in 24 hours.
- Wall mount via knockouts on the back of the housing.
- Injection-molded, engineering-grade, 5VA flame retardant, high-impact resistant, thermoplastic in neutral gray or black finish.
- Fully-gasketed clear polycarbonate cover offers protection against wet, non-hazardous dust, corrosive atmospheres and to water spray or splashing water locations.
- CW: Optional internal heater and battery blanket for cold temperature applications (-13F to 104F)
- USA: Substantial transformation assembly in the U.S. complies with “AssembLED in the USA” under the Buy American Act.
Features/Specifications
ILLUMINATION- Two fully adjustable, ultra-bright, round, 7.2W MR-16 halogen lamp heads with a fully gasketed enclosure and clear polycarbonate lens cover.
- Dual 120/277 voltage.
- Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing.
- LVD (low voltage disconnect) prevents battery from deep discharge.
- 6V maintenance-free, rechargeable Sealed lead acid battery.
- Internal solid-state transfer switch automatically connects the internal battery to lamp heads for minimum 90-minute emergency illumination.
- Fully automatic solid-state, two-rate charger initiates battery charging to recharge a discharged battery in 24 hours.
- Wall mount via knockouts on the back of the housing.
- Injection-molded, engineering-grade, 5VA flame retardant, high-impact resistant, thermoplastic in neutral gray or black finish.
- Fully-gasketed clear polycarbonate cover offers protection against wet, non-hazardous dust, corrosive atmospheres and to water spray or splashing water locations.
- CW: Optional internal heater and battery blanket for cold temperature applications (-13F to 104F)
- USA: Substantial transformation assembly in the U.S. complies with “AssembLED in the USA” under the Buy American Act.
WARRANTY/LISTING
- Five year warranty on all electronics and housing. Battery pro-rated for two years.
- Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes.
- UL listed for wet locations. (20°C – 40°C)
Related items
The NHL-LPSHW Series is designed to provide 750 to 1150 watts of emergency power to Incandescent, Fluorescent, Induction and/or LED fixtures. The NHL-LPSHW unit provides clean, sinusoidal A C output power allowing it to be remotely mounted up to 1,000 feet away from the controlled fixture(s). Unlike a ballast fluorescent emergency pack, the NHL-LPSHW provided power to the input side of the fixture (including the fixture ballast) eliminating any chance of incompatibility. The NHL-LPSHW Series is designed for surface mounting. All NHLLPSHW systems will provided emergency power output for a minimum of 90 minutes.
The NHL-LPSHW Midsize-electrical inverter systems for powering up to 750 to 1150 watts of incandescent, fluorescent, induction or LED lighting loads. Pulse width modulated (PWM) output design provides clean, 60 Hz. sinusoidal emergency power to loads.
$0.00
NHL-MR16X
LED NEMA4X/NSF EMERGENCY UNIT INDEMR16
- Two fully adjustable, ultra bright 3.3 watt high performance MR-16 base LED lamp heads for optimized center-to-center spacing.
- Dual 120/277 voltage.
- Unique bi-color LED indicator light alerts occupant on battery condition (Green-normal, Red-check-battery).
- Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing.
- 6V/12V maintenance-free, rechargeable NiCd battery (15W models).
- 6V/12V maintenance-free, rechargeable sealed lead acid battery (36W and 54W models).
- Offers 7.8W, 28.8W, 46.8W of remote capacity (6V/12V DC output) standard on the 15W, 36W and 54W models.
- Internal solid-state transfer switch automatically connects the internal battery to LED board for minimum 90-minute emergency illumination.
- Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours.
- Universal knockout pattern on back provided with gasket for watertight seal for back mount.
- Suitable for wall mount.
$0.00
- Ultra bright, energy efficient, long life Red or Green LEDs.
- Dual 120/277 voltage.
- Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing.
- 4.8V long life, maintenance-free, rechargeable NiCd battery (EM models only).
- Internal solid-state transfer switch automatically connects the internal battery to LED board for minimum 90-minute emergency illumination
- Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours.
- Mounting hardware provided for back surface wall mount.
- 5VA flame retardant, UV-stabilized polycarbonate in white or black finish.
- High-impact resistant, UV-stabilized polycarbonate clear lens.
- Corrosion-resistant enclosure with engineering grade silicone gasket.
- Knockouts provided for conduit feed applications.
- EZ snap-out Chevron directional indicators.
- NEMA4X and NSF rated.
-
UL certified for use in food service operations.
- UL listed for Wet Locations.
- Certified to CEC under Title 20 Regulations.
$0.00
The WLEC is the complimentary combo version of our WLE. Full LED illumination in a watertight housing perfect for food processing facilities, hose down areas, commercial kitchens, exposed outdoor pavilions, etc.
$0.00
$0.00