Micro Inverter Series
MPS Series inverter systems are designed to provide sinusoidal AC emergency power to connected incandescent, fluorescent or LED fixtures of between 20 and 55 watts. Surface, recessed or ceiling T-Grid mount models are designed for easy installation either on or near controlled fixtures. MPS models support Normally-ON, Normally-OFF, switched operation or any combination thereof (see wiring diagram).
- Product SKU: NHL-MPS
- Category: Inverters, Life Safety
Warranty / Listing: Unit: (excluding lamps) Full coverage against defects in materials and workmanship for 3 years from date of shipment. Battery: 3 years (Lead-Acid-5 yrs NiCd) full warranty plus an additional 7 years of pro-rata coverage. All models are UL924 Listed and meet NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes. Optional T-Grid models are plenum rated. UL Listed for damp locations (0° - 50°C for NiCad models and 20° - 30°C for lead-calcium models).
Warranty / Listing: Unit: (excluding lamps) Full coverage against defects in materials and workmanship for 3 years from date of shipment. Battery: 3 years (Lead-Acid-5 yrs NiCd) full warranty plus an additional 7 years of pro-rata coverage. All models are UL924 Listed and meet NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes. Optional T-Grid models are plenum rated. UL Listed for damp locations (0° - 50°C for NiCad models and 20° - 30°C for lead-calcium models).
- Electrical Specifications: Input Input Voltages: 120 or 277VAC ±10%. Input Frequencies: 60Hz ±2% | Input Protection: Provided by Service Panel, Rated 20A max. Output. Output Voltages: 120 or 277VAC (60Hz) | Efficiency Rating: 98% at full rated load (line). Waveform: Sinusoidal (digitally controlled, PWM design). Static Voltage: ±5% during battery discharge. 0-100% linear load. Output Frequencies: 60Hz. ±0.3Hz during emergency cycle. Output Distortion: Less than 3% THD (linear load). Transfer Time: Less than 1.0 second. Load Power Factor Range: 0.44 Lead to 0.44 Lag. Minimum Loading: 0% of rated system capacity. Output Protection: Inverter fuse.
- Housing: Heavy duty steel cabinet is finished in white baked-on powder paint providing scratch and corrosion resistance. Optional paint color (-SP) finishes available, consult factory.
- Mounting: Surface Mount: Surface mount models are designed for mounting to walls by means of keyhole slots provided in the back of the unit housing. Recess Mount: Recess models provide recess mounting holes on both sides of the enclosure. T-Grid Mount: Housing design allows simple drop-in installation between t-grid runs. Safety wires (supplied by others) are required for attachment to building structure.
Related items
The NHL-LPSHW Series is designed to provide 750 to 1150 watts of emergency power to Incandescent, Fluorescent, Induction and/or LED fixtures. The NHL-LPSHW unit provides clean, sinusoidal A C output power allowing it to be remotely mounted up to 1,000 feet away from the controlled fixture(s). Unlike a ballast fluorescent emergency pack, the NHL-LPSHW provided power to the input side of the fixture (including the fixture ballast) eliminating any chance of incompatibility. The NHL-LPSHW Series is designed for surface mounting. All NHLLPSHW systems will provided emergency power output for a minimum of 90 minutes.
The NHL-LPSHW Midsize-electrical inverter systems for powering up to 750 to 1150 watts of incandescent, fluorescent, induction or LED lighting loads. Pulse width modulated (PWM) output design provides clean, 60 Hz. sinusoidal emergency power to loads.
New Horizon Lighting proudly offers our filed installable LED emergency battery packs available in five different outputs to fulfill your emergency lighting needs! These constant current LED Emergency battery packs are easy to install and will provide a minimum of 90 minutes of emergency illumination. UL listed for damp locations and filed installation.
Mini-electrical inverter systems for powering up to 220 Watts/250VA of incandescent, fluorescent, induction or LED lighting loads. Pulse width modulated (PWM) output design provides clean, 60 Hz. sinusoidal emergency power to loads. Models are available for surface, recessed or T-Grid mounting as required.