LED EM Backups
New Horizon Lighting proudly offers our filed installable LED emergency battery packs available in five different outputs to fulfill your emergency lighting needs! These constant current LED Emergency battery packs are easy to install and will provide a minimum of 90 minutes of emergency illumination. UL listed for damp locations and filed installation.
- Product SKU: NHL-BLEDEM
- Category: Inverters, Life Safety
Applications:
Determine Electrical Compatibility
- A) Verify that the Luminaire LED Driver, where applicable, is Class 2 compliant.
- B) Verify that the Luminaire LED Lamp(s) have an operating voltage between 20Vdc and 50Vdc.
- C) Verify that the Luminaire LED Lamp(s) have a power rating equal to, or greater than, the emergency power rating of the BLEDEM-CP model under consideration.
Calculate Lumen Output During Emergency Operation
- A) Access luminaire data by logging onto Design Lites Consortium (www.designlights.org).
- B) Select “Search the DLC Qualified Product List’ on the DLC homepage.
- C) Enter manufacturer name and P/N of luminaire under consideration in the “search by keyword” text window.
- D) Select ”Search” tab to open the “Qualified Products List”.
- E) Determine luminaire Lumens per Watt efficacy in “Rated Data” specifications.
- F) Multiply luminaire Lumens per Watt by Emergency Output of the BLEDEM-CP model under consideration
Accessories:
- Warranty / Listing: UL Classified for factory or field installation. Suitable for damp locations (0°C-50°C). 5 Year Warranty on all electroncis and housing. Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State codes.Specifications
Applications:
Determine Electrical Compatibility
- A) Verify that the Luminaire LED Driver, where applicable, is Class 2 compliant.
- B) Verify that the Luminaire LED Lamp(s) have an operating voltage between 20Vdc and 50Vdc.
- C) Verify that the Luminaire LED Lamp(s) have a power rating equal to, or greater than, the emergency power rating of the BLEDEM-CP model under consideration.
Calculate Lumen Output During Emergency Operation
- A) Access luminaire data by logging onto Design Lites Consortium (www.designlights.org).
- B) Select “Search the DLC Qualified Product List’ on the DLC homepage.
- C) Enter manufacturer name and P/N of luminaire under consideration in the “search by keyword” text window.
- D) Select ”Search” tab to open the “Qualified Products List”.
- E) Determine luminaire Lumens per Watt efficacy in “Rated Data” specifications.
- F) Multiply luminaire Lumens per Watt by Emergency Output of the BLEDEM-CP model under consideration
Accessories:
- Warranty / Listing: UL Classified for factory or field installation. Suitable for damp locations (0°C-50°C). 5 Year Warranty on all electroncis and housing. Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State codes.Specifications
- Illumination: Provides constant power output to the load during emergency mode operation. Can be operated as NORMALLY-ON, NORMALLY-OFF or SWITCHED LOAD.
- Electrical: Universal 120-277V, 50/60Hz input. Charge/Power "ON" LED indicator light and push-to-test switch for mandate code compliance testing. Long life, maintenance free, rechargeable NiCad Battery. Output short/overcurrent protection: Electronic limiting, with normal operation resuming upon removal of fault. 90 Minute minimum emergency operating time over full temperature range (other run times available upon request). Output classification: Class 2 Compliant. Surge protection: Per C62.41 (TVS). Input overcurrent protection: Fusible link. 24 Hour maximum battery recharge time.
- Housing: LED illuminated and remote mounted test switch. Injection-molded, engineering grade, 5VA flame retardant, high impact resistant, thermoplastic in a black finish.
- Mounting: Suitable for installation inside, on top, or in remote mount of the fixture.
Related items
The NHL-LPSHW Series is designed to provide 750 to 1150 watts of emergency power to Incandescent, Fluorescent, Induction and/or LED fixtures. The NHL-LPSHW unit provides clean, sinusoidal A C output power allowing it to be remotely mounted up to 1,000 feet away from the controlled fixture(s). Unlike a ballast fluorescent emergency pack, the NHL-LPSHW provided power to the input side of the fixture (including the fixture ballast) eliminating any chance of incompatibility. The NHL-LPSHW Series is designed for surface mounting. All NHLLPSHW systems will provided emergency power output for a minimum of 90 minutes.
The NHL-LPSHW Midsize-electrical inverter systems for powering up to 750 to 1150 watts of incandescent, fluorescent, induction or LED lighting loads. Pulse width modulated (PWM) output design provides clean, 60 Hz. sinusoidal emergency power to loads.
Mini-electrical inverter systems for powering up to 220 Watts/250VA of incandescent, fluorescent, induction or LED lighting loads. Pulse width modulated (PWM) output design provides clean, 60 Hz. sinusoidal emergency power to loads. Models are available for surface, recessed or T-Grid mounting as required.
MPS Series inverter systems are designed to provide sinusoidal AC emergency power to connected incandescent, fluorescent or LED fixtures of between 20 and 55 watts. Surface, recessed or ceiling T-Grid mount models are designed for easy installation either on or near controlled fixtures. MPS models support Normally-ON, Normally-OFF, switched operation or any combination thereof (see wiring diagram).